10
R
egeneration &
L
ife
02
CRU BIOW OPERATION
2. CRU BIOW OPERATION
2.1. START-UP
• Connect the CRU Biow to an earthed power
outlet.
• Check that the switch is in the ON position.
If not, turn the equipment on at the ON/
OFF switch located on the right side of the
equipment, indicated in the image below.
Once the equipment has been switched on, the
display will light up and from this moment on
the equipment will be controlled by the remote
control.
IMPORTANT
Once the equipment is connected to the
network, ensure that the ON/OFF switch
remains easily accessible at all times so that
the equipment can be disconnected at any
time.
2.2.REMOTECONTROL
On/Off
Thermal treatment
Heat mode
Ultraviolet lamps
activation
Timer
activation
+ button
(Increases
temperature
in Heat Mode)
Program selection
Plasma ionization
activation
- button
(Decreases temperature
in Heat Mode)
Use of the remote control
watch video
Summary of Contents for biow 100
Page 1: ...USER MANUAL CRU BIOW Regeneration Life...
Page 2: ...Regeneration Life...