ID Settings
On the ID Settings menu the system Admin can setup: Operator ID, Patient ID, Measurement ID
and Operator mode. All these inputs are optional, and can be enabled or disabled.
Operator ID
If enabled, the operator
’
s identification (ID) is required before processing a spinit® test.
The operator ID will be displayed with the result and stored along with the other specific data for
this run (see Patient and control results records, page 13).
To add an Operator, select Operators on the Advanced settings menu. Press Add to enter letters /
numbers or scan with your ID. Press Enter to confirm and select Back to go to previous menu.
Patient ID
If this function is enabled, the patient ID must be entered for each patient sample to be analyzed.
Use letters / numbers or scan barcode to add patient ID and press Enter to confirm.
The Patient ID will be stored in the memory and displayed along with the other specific data for
this run (See patient and control results, page 13).
spinit® User Manual
|
Configuration
15
The spinit® menus
