Biostar Z170GT7, Manual

Page: 36 / 79

36 | Chapter 4: Useful help
RAID 10 combines the advantages (and
disadvantages) of RAID 0 and RAID 1 in one
single system. It provides security by mirroring
all data on a secondary set of disks (disk 3 and
4 in the drawing below) while using striping
across each set of disks to speed up data
transfers.
Features and Benefits
• Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
• Benefits: Optimizes for both fault tolerance and performance, allowing for automatic
redundancy. May be simultaneously used with other RAID levels in an array, and allows
for spare disks.
• Drawbacks: Requires twice the available disk space for data redundancy, the same as
RAID level 1.
• Fault Tolerance: Yes.
A RAID 5 array can withstand a single disk failure
without losing data or access to data. Although
RAID 5 can be achieved in software, a hardware
controller is recommended. Often extra cache
memory is used on these controllers to improve
the write performance.
Features and Benefits
• Drives: Minimum 3.
• Uses: RAID 5 is recommended for transaction processing and general purpose service.
• Benefits: An ideal combination of good performance, good fault tolerance, and high
capacity and storage efficiency.
• Drawbacks: Individual block data transfer rate same as a single disk. Write performance
can be CPU intensive.
• Fault Tolerance: Yes.
Note
»
For more details settings about Intel® Rapid Storage Technology (Intel® RST), please visit
http://www.intel.com/p/en_US/support/highlights/chpsts/imsm
»
PCI-E Storage only supports RAID 0, 1 & 5.