Chapter
3
RAID
Setting
Guide
3-7
restarted, press
F6
key when the message
Setup is inspecting your
computer’s hardware configuration
appears.
2. Press
S
key to specify additional devices when the
Windows 2000
Setup
window appears.
3. In the follow-on window of device type, please select
Other
and press
Enter
to continue.
4. Insert the floppy disk of driver, then press
Enter
to continue.
5. The system will ask whether to install driver under
WinNT
or under
Windows 200
0, please select to install driver under
Windows 2000.
6. The follow-on interface will list the devices to be installed, in which
HPT370 UDMA/ATA100 RAID Controller
item should be included.( If
users want to install other devices, please operate at this time. If all devices
have been successfully installed, please go to next.)
7. Press
Enter
to continue Windows 2000 setup.
Verify Installation
When the driver has been successfully installed and the computer restarted:
1. Right-click
My Computer
icon,
select
Property
item in the
popup menu.
2. In the popup window, select
Hardware
item and then click
Device Manager
button.
If there is
HPT370 UDMA/ATA100 RAID Controller
item in the popup
Device Manager
window, it indicates that the driver has been successfully
installed. Otherwise, please reinstall the driver.