Chapter
3
RAID
Setting
Guide
3-34
3.4.3 Delete RAID
The following steps shall be taken to delete RAID.
1. In the menu zone, select
2. Delete RAID
, press
Enter
to confirm
this operation and go to next.
2. In the validated channel status zone, use the arrow key to select
the disk array to be deleted and press
Enter
to confirm.
3. Press
Y
when warned
Are you sure you want to remove the disk
array?
3.4.4 Rebuild Mirror Array
The following steps shall be taken to rebuild the mirror array.
1. In the menu zone, select
3. Rebuild Mirror Array
, press
Enter
to
confirm this operation and go to next.
2. In the menu zone of the popup sub-interface, select
1. Select
Source Disk: None
and press
Enter
to confirm.
3. In the validated channel status zone, select the source disk of the
mirror array and then press
Ente
r.
4. In the menu zone of the popup sub-interface, select
2. Select Target
Disk: None
and press
Enter
to confirm.
5. In the validated channel status zone, select the target disk of the
mirror array and then press
Ente
r.
6. In the menu zone of the popup sub-interface, select
3. Start Duplication
Process
and press
Enter
to confirm.
7. Press
Y
when asked
The last time rebuild not completed.
Continue?
