Chapter
3
RAID
Setting
Guide
3-33
3.4.2 Create RAID
The following steps shall be taken to create RAID in BIOS.
1. Use the arrow key to select
1. Create RAI
D.
2. Press
Enter
to confirm and go to next.
3. Select
1. Array Mode
in the popup sub-interface and press
Ente
r.
4. Select the intended RAID level in the popup selection box and press
Ente
r.
5. Select
2. Select Disk Drives
in the previous sub-interface and press
Ente
r.
6. Select the disks to be used for creating the disk array and press
Enter
to confirm in the channel status zone.
7. Select
3. Start Creation Process
and press
Enter
except that in the
selection box you have selected
Stripping (RAID 0) for Performanc
e.
8. Press
Y
to continue when the warning message appears.
Note:
1. If you have selected
Stripping (RAID 0) for Performance
in the
popup sub-interface after the operation of
1. Array Mode
, you should
direct go to
3. Strip Size 64K
and then select
4. Start Creation
Process
. The default strip size is
64K
.
2. Different warning messages appear according to different RAID levels.
