Chapter
3
RAID
Setting
Guide
3-6
3.2.4 Windows 2000
Install driver under Windows 2000
Automatic Installation
Start the computer and enter the operating system of Windows 2000, the
system will automatically detect new hardware and prompt users to install the
driver. Please insert the floppy disk of driver and follow the system prompt to
finish the driver installation and restart the computer.
Manual Installation
If Windows can not find new hardware, the driver shall be installed through the
following steps :
1. Click
Star
t-->
Setu
p-->
Control Pane
l, select
Add/Remove New
Hardwar
e. In the follow-on window, Click
Next
to continue.
2. In the follow-on window, select the first item
Add/Troubleshoot a
devic
e, then click
Next
to continue.
3. In the follow-on device list, select the first item
Add New Devic
e,
then click
Next
to continue.
4. Then the system will ask
Did you want Windows to search for
your new hardware?
Please select
No, I want to select the
hardware from a lis
t. Then click
Next
to continue.
5. In the follow-on window of device types, select
SCSI and RAID
controller
s, then click
Next
to continue.
6. In the follow-on window, select
Have Disk..
..
7. Please insert the floppy disk of driver and input path name
A:\Win2k
into
Copy manufacturer’s files from:
column, then click
O
K.
8. In the follow-on type column, select
HPT370 UDMA/ATA100 RAID
Controllers.
9. Follow the system prompt to finish the installation, and restart
the computer.
Install driver in the process of Windows 2000
installation
1. If Windows 2000 is installed from the floppy drive, please let the installing
program run automatically. If Windows 2000 is installed from the
CD-ROM drive, please
F6
key when the message
Press F6 if you
need to install third party SCSI or RAID driver
appears. If it is to
type
Winnt
and install, after files have been copied and the computer
