28 | 6. O.N.E Menu
MCT Timing Mode
This item allows you to select the DRAM Frequency programming method. If Auto, the DRAM
speed will be based on SPDs. If Limit, the DRAM speed will not exceed the specified value. If
Manual, the DRAM speed specified will be programmed regardless of SPD.
Options: Auto (Default) / Limit / Manual
Note
»
The following items appear only when you set the MCT Timing Mode function to [Limit]
Memclock Value
This item allows you to select the memory clock value in MHZ.
Options: DDR3-800 (Default)
DRAM Timing Mode
This item allows you to select DRAM Timing Mode.
Options: Auto (Default) / Manual
Note
»
The following items appear only when you set the DRAM Timing Mode function to [Manual]
CL
This item CAS Latency (CL).
Options: Auto (Default)
2TCMD
Options: Auto (Default)
TRCD
This item RAS to CAS delay.
Options: Auto (Default)
TRP
This item row precharge time.
Options: Auto (Default)
TRTP
This item Read CAS# to precharge time.
Options: Auto (Default)
TRAS
This item row active strobe.
Options: Auto (Default)
TRC
This item row cycle time.
Options: Auto (Default)
TWR
This item write recovery.
Options: Auto (Default)
TRRD
This item RAS to RAS delay.
Options: Auto (Default)
TRWTTO
This item read to write turnaround.
Options: Auto (Default)
