Operation Manual BioSmart PV-WM v.029.1|03.2021|en
Page 16 of 24
BioSmart PV-WM Reader
Operation Manual
Figure 9
–
Installing the Ethernet Cable Connector
c)
install the back cover of the reader on the reader in accordance with the following requirements:
attach the back cover to the reader case. Make sure that the sealing gum didn
’
t fall out of the
special groove and was firmly pressed by the protrusion on the back cover side;
fix the back cover with screws (see Figure 7). It
’
s important to check that the sealing gum
does
n’
t squeeze out of the special recess while tightening the screws. Therefore, tighten the
screws on the back cover carefully, tightening each screw in turn.