BioSensory SD A1cCare, User Instruction Manual

Page: 21 / 61

23
3. Press the
ೞ
or
೛
button to change the currently flashing setting. You can press
the
ೞ
or
೛
button as as much as you need(or keep press it) to reach the desired
setting(value).
4. Press the Enter button again to confirm (store) the current setting and go to the
next setting. You can only move forward through the settings. Moving backwards
is not possible. Corrections can only be made by repeating the settings. The setting
procedure can be terminated at any time by pressing the Enter button. The settings
made up to that point will be stored.
If you want to exit the setting mode without changing, press the set button .
Stage 1) Setting - Beep
In 1st stage, you set the Beep function.
1. If you enter the set mode, the first step of the setting mode, beep, will appear.
2. Set the beep mode on or off by pressing either
ೞ
or
೛
button and then select
the preferred feature by pressing the Enter button. If you select the beep on feature,
a ‘beep’ sound will be made at the same time; otherwise, if you select the beep off
feature, no sound is will be made.