Page 12
V1.6.3
4.
Getting started
Caution! Biohazard!
Always wear appropriate gloves, a mask, and safety goggles during any
biohazardous operations in extraction process. Even when touching the device af-
ter any operation with a biohazard risk, wear appropriate gloves and a mask since
the device may be contaminated.
Note.
Before starting extraction, put on appropriate gloves, a mask, and safety goggles
if required by the operation. In the operation from preparing samples to extraction
completion, be careful not to contaminate the samples with sweat, saliva, etc.
4.1.
Turning on the power. Make sure that the power cable are connected securely to the BioMag-
Pure 12 Plus system. Connect the plug of the power cable to the outlet.
4.2.
Preparation. User must prepare individual protection, such as gloves, masks and safety gog-
gles. For the preparation of samples, refer to the handbook of each kit. Following items are
provided with reagent kits: reagent cartridge, reaction chamber, tip holder, small tip (optional),
filtered tip, sample tube, elute tube, piercing pin.
4.3.
Extraction.
4.3.1. Turn the power switch on and waiting for the LCM screen turn on and shows
“BioMagPure 12
Plus System Stand-By
”.
4.3.2. Press the
“Start” button. The system will process self-testing, and then go to steady mode.
Note.
The system will block main functions before the completion of self-testing process.
4.3.3. Open the
drawer and remove the
sample rack from the instrument.
4.3.4. Load Reagent Cartridges, and all plastics disposables (Reaction Chamber, Tip Holder, Pierc-
ing Pin, Filtered Tip and Sample Tube and Elute Tube. (Optionally supplied with some kit
types). To pull apart reagent cartridges, slash open the dotted line with cutter.
Divide the cartridges
Insert the cartridges
Summary of Contents for BioMagPure 12 Plus
Page 1: ...Edition v1 6 3 ...
