BIOS Professional 200TC, Instruction Manual, Page: 7 / 44

3.0 Getting Started
The monitor should be powered up by the AC/DC adaptor included with the kit,
with 4 x AA batteries used for back up purposes only, in the event of a power
outage.
1. Insert adaptor plug into the AC/DC Socket of the monitor. Monitor will power
on, with dashes displayed on each numbered line.
2. Insert 4 x AA batteries in the battery compartment located on the back of the
monitor, observing the indicated polarity.
3.1 Clearing Memory
Temperature data may have been stored during production. Before proceeding
with the set up procedure, the memory must be cleared.
1. Press and hold
MODE/SET while pressing the reset button located in the
battery compartment on the back of the monitor.
2. Once a beep is heard, release reset button.
NOTE: The reset button must be released
before the MODE/SET button.
3. Release the
MODE/SET button.
4. Dashes (“--“), or “LS”, will be displayed on the monitor. Memory has been
cleared.
4.0 Time & Date Setting
NOTE: To maximize the benefits of this unit, accurate time and date should
be set.
1. Press and hold MODE/SET until you hear a beep and the “12” begins to
flash.
2. Use the or arrow to choose either a 24 or 12 hr clock.
3. Press
MODE/SET to confirm.
4. Once the clock beings to flash, repeat steps 2 and 3 to program the time.
5. The year will begin flashing. Use the and arrows to choose the correct
year.
6. Press MODE/SET to confirm.
7. “M” (month) and “D” (day) will begin to flash. Use the and arrows to
select the format in which you would like the date to be displayed. Press
MODE/SET to confirm.
8. Use the and arrows to program the month and day.
9. Press
MODE/SET to confirm.