Project Type
Date:
Customer:
Job Number:
Item Number:
Designer:
Revision:
Contact: Graphic’s Department
Reason For Project:
New Item: X
New Branding:
Design Update:
N/A:
Colour Breakdown
Artwork is not to be amended or scaled. If any changes are
and we will amend here and resend artwork through. PLEASE
RETURN WITH SIGNATURE
IB-EN
August 7 2020
Thermor LTD
TH4093
A6PC
Natalia Siguenza
A
X
0
57475 01663
0
2.4 Using the AC/DC Adapter
You may also operate this monitor using the included AC/
DC adapter (output 6V DC/600 mA with DIN plug). Use
only the included AC/DC adapter to avoid damaging the
unit.
1. Ensure that the AC/DC adapter and cable are not
damaged.
2. Plug the adapter cable into the AC/DC adapter port on
the blood pressure monitor.
3. Plug the adapter into your electrical outlet. When the AC/DC adapter is connected, no battery current is
consumed. Note: No power is taken from the batteries while the AC/DC adapter is connected to the monitor.
If electrical power is interrupted, (e.g., by accidental removal of the AC/DC adapter from the outlet) the
monitor must be reset by removing the plug from the socket and reinserting the AC/DC adapter connection.
4. Slide the lock switch to the unlock position.
Functional check:
Hold the button down to test all the display elements. When functioning correctly all
segments must appear.
2.5 Storing the Cuff
The cuff used for measuring blood pressure is a delicate component of the device and should be stored carefully
when not in use. The A6PC is designed such that the cuff can be stored along with the blood pressure monitor.
Follow these steps to store the blood pressure cuff.
1. Roll up the upper arm cuff along with the inflating tube.
2. Push the folded cuff in the compartment on the back of the stand
to store it safely. Place the blood pressure monitor on the front of
the stand.
NOTE:
The stand will not fit inside the included storage bag, with the
blood pressure monitor and cuff.
3. Using the Device
This section describes how to get the maximum benefit from your A6PC blood pressure monitor. Follow the
instructions carefully to get an accurate measurement of your blood pressure and pulse rate.
3.1 Setting the Time and Date
When you insert the batteries for the first time (see “Inserting the batteries”),
the monitor prompts you to set the current date and time. You can also adjust the
date, time and user at any time by pressing and holding down the button for
over 3 seconds. Follow these steps to set the date and time settings:
ST
AR
T
ST
OP
DC 6V
600mA
3
1
1
2
3
1
1
2
ST
AR
T
ST
OP
