Project Type
Date:
Customer:
Job Number:
Item Number:
Designer:
Revision:
Contact: Graphic’s Department
Reason For Project:
New Item: X
New Branding:
Design Update:
N/A:
Colour Breakdown
Artwork is not to be amended or scaled. If any changes are
and we will amend here and resend artwork through. PLEASE
RETURN WITH SIGNATURE
IB-EN
August 7 2020
Thermor LTD
TH4093
A6PC
Natalia Siguenza
A
X
0
57475 01663
0
1. When you press the button for over 3 seconds, the year will start flashing. Press
the or buttons to adjust the year and press the button to confirm setting.
2. Next, the screen starts flashing the month setting. Press the or buttons
repeatedly to set the month and then press the button to confirm the settings.
Follow the same steps to set the date setting.
3. Lastly, the screen starts flashing the hour values. Press the or buttons
repeatedly to set the hour and then press the button to confirm the settings.
Follow the same steps to set the minute values.
3.2 Measurement Mode Selection (MAM or single)
Clinical studies demonstrate taking multiple blood pressure readings and calculating an “average” is more likely
to determine your true blood pressure. Your premium blood pressure unit allows you to switch the unit to an
Averaging Mode setting that automatically takes multiple readings!
Averaging Mode Slide Switch (MAM):
a) If you would like to take an Averaging Mode measurement, move the slide
switch to the right.
b) Averaging Mode takes 3 measurements in succession and calculates the result and displays it as a single
average measurement. A symbol in the display indicates that the unit is set to the Averaging Mode.
c) There will be 15 seconds resting time in-between each measurement. The unit will count down from
15 seconds. A beep will sound at the last 5 seconds to remind you that the unit is about to take another
measurement.
If one of the measurements causes an error message, it will be repeated one more time. If
any additional error occurs the measurement will be discontinued and error code displayed.
Note:
AFIB detection can only be done in MAM mode.
Single mode
a) If you would like to take a single mode measurement, please move the slide
switch to the left.
b) Single mode only has 1 measurement.
MONTH-DATE
TIME
