Bioprogramming REP27D-JP, Manual

Page: 11 / 37

OPERA
TING
INSTRUCTIONS
MAJOR PARTS
TROUBLESHOOTING
RA
TINGS &
SPECIFICA
TIONS
IMPORT
ANT SAFETY
INSTRUCTIONS
CUSTOMER SUPPORT
& W
ARRANTY
한
국
어
日
本
語
简
体
中
文
繁
體
中
文
English
5 4
General Operation
Light Press Blinking
OPERATING INSTRUCTIONS
Red
Blinking
Light
After use, hold down the power button
to turn off the power. Next, remove the
power plug from the outlet.
[After Use]
Press nozzle into place while twisting.
Pull off nozzle while twisting.
[Attaching the Nozzle]
*Please refrain from using hair coating agents
or oils prior to using this device.
*Do not touch the nozzle, which may be hot
during or after use.
*If hair gets too close to the air intake, it may
get sucked in the device. Use with caution.
Insert power plug into outlet
Turn on device
4
Select air speed
Make sure that only this device is plugged into
the outlet.
Make sure the power plug is firmly inserted
into the outlet.
Stand-by Mode
When the power plug is
inserted into an outlet, the
device will be in stand-by
mode. The red power light
will softly blink.
［Before Use］
Use a towel to remove excess
water after washing your hair.
Air Speed Buttons
To Stop the Air
HOT
COOL
HOT
COOL
Start-up
Melody
♪
Red Light
PRESS
Air Speed
lights are white
Firmly Insert
●
●
●
The device will return to stand-by mode
when the power has been turned OFF.
The red power light will softly blink.
After confirming the power is off,
remove the power cord from the outlet.
Make sure to grasp the plug when
removing the power cord.
Grasp the plug
Press this button to switch between
cool and hot air.
The air speed will change by
pressing either 1 (Low), 2
(Medium) or 3 (High)
Blue Light Red Light
Press the air speed button
currently in use.
HOT
COOL
HOT
COOL
Blue Light
Comb fingers through your
hair while drying to ensure
hot air reaches the roots.
PRESS
Approx.
two seconds
Ending
Melody
♪
Red
Blinking
Light
（ High ）
( Medium ）
( Low ）
Temperature Switch Button
Automatic Off Function
The device will automatically shut OFF after approximately
60 minutes. To resume use, press the power button again.
For more information,
please access the official website below:
Bioprogramming Club Official Website
bioprogramming-club.jp
[Removing the Nozzle]
（ ）