manualshive.com logo in svg

BIOPAC Systems, Inc. BioNomadix Logger, User Manual, Page: 13 / 28

Share
Download
BIOPAC Systems, Inc. BioNomadix Logger User Manual Download Page 13

Page 13 of 28

  

BIOPAC Systems, Inc.

 

 

 

WWW.BIOPAC.COM

  

 

8.30.2018

 

 

 

Preflight Setting 

The Preflight setting automatically wakes the Logger unit from sleep prior to the start of a scheduled acquisition. 
(Preflight options are 2, 5, 8, or 15 minutes.) When enabled, the Preflight screen displays a countdown timer to the 
acquisition start time, along with Summary information screen showing transmitter status. If an error is detected, 
such as a transmitter not properly powered on, the Logger will vibrate/beep a warning. This gives the user sufficient 
time to make a correction if necessary without aborting the acquisition. To set up a Preflight interval: 

1.

 

After setting a scheduled start time for an acquisition (Steps 1-4 above,) scroll to the “Preflight” option. 

 

Use the 

 button to select a Preflight interval. In the example above, a sleeping Logger will 

automatically wake up five minutes prior to the scheduled start of acquisition.

 

Summary of Contents for BioNomadix Logger





























Reviews:

No comments