12
Bionova® IC10/20FR
Hours setting: Ten hours (
H
h:mm)
The blue light number 1 corresponding to PRO sector should
be on. If any other light from PRO sector is on, press
button as many times as necessary to turn on the blue light
number 1. This indicates ten hour setting.
To increase ten hours value, press
button. To reduce ten
hours value, press button.
Note:
The possible values for ten hour are 0, 1 and 2.
Hours setting: Unit hours (h
H
:mm)
Press
button to turn on the blue light number 2. This
indicates unit hours setting. If any other light from PRO sector
is on, press
button as many times as necessary to
turn on the blue light number 2.
To increase unit hours value, press
button. To decrease
unit hours value, press button.
Minutes setting
Minutes setting: Ten minutes (hh:
M
m)
Press
button to turn on the blue light number 3. This
indicates ten minutes setting. If any other light from PRO
sector is on, press
button as many times as necessary
to turn on the blue light number 3.
To increase ten minutes value, press
button. To decrease
Instructions for use
ten minutes value, press button.
Note:
Possible values for ten minutes are 0, 1, 2, 3, 4 and 5.
Minutes setting: Unit minutes (hh:m
M
)
Press
button to turn on the blue light number 4. This
indicates unit minutes setting. If any other light from Pro
sector is on, press
button as many times as necessary
to turn on the blue light number 4.
To increase unit minutes value, press
button. To decrease
unit minutes value, press button.
Finish hours setting
To save changes press and hold
button for three
seconds. A beep will sound, PRO green light will turn on and a
ticket with the new set time will be printed to indicate the
procedure has been completed successfully.
Note:
If the modification has not been done correctly, the
auto-reader will emit 3 beeps and the red light from PRO
sector will turn on. Repeat the procedure.
Cancel hours setting
To discard the changes, unplug the incubator from the power
source.
Printing language selection
mode
This function allows you to change the auto-reader printing
language.
Note:
Each language has a code number assigned:
1:
English |
2:
Spanish |
3:
Portuguese |
4:
Turkish |
5:
French |
6:
Romanian
Enabling Printing language selection
Turn off the device.
