Bionizer Eco - Oxidizer, Instruction Book

Page: 8 / 16

INSTALLATION
Filter
Pressure
Filter
For sand filters,
glass or silica sand
media provides
optimum results.
Pool
Pump
10cm
(minimum)
NOTE THAT THE 10cm SPACINGS SHOWN ABOVE ARE FROM THE
EDGES OF THE PODS, NOT THE CENTRE OF THE PODS.
Ionizing
Pod
pH Tee
Oxidizing
Pod
10cm
min
10cm
min
! Locate a section of pipe where the Pod can easily
fit. The Pods must be fitted on the pipe that
sends water back to the pool after it has been
filtered (the “Return Line”).
! The Pods can be fitted horizontally or vertically, so
it can be mounted anywhere installation is
convenient and easy.
! If you are also installing a Bionizer and/or pH BOSS
the fittings MUST be installed in this order :
1. pH BOSS Probe and Injection Tee
2. Bionizer Ionizing Pod
3. Oxidizing Pod
The Oxidizing Pod can be fitted horizontally or
vertically, as long as it is after the other two.
! HINT : Even if you are not installing a pH BOSS
now, you may want to leave a space for the pH
BOSS Tee-Piece Fitting. This requires 20cm of
HORIZONTAL pipe BEFORE the Ionizing Pod.
INSTALLING THE OXIDIZING POD
8
INSTRUCTION BOOK