BIONIME rightest GM260, User Manual

Page: 24 / 28

45 44
Error messages and Trouble shooting Error messages and Trouble shooting
Battery Error
1. The " symbol is blinking when the battery power is low. Please
change the meter battery as soon as you can. You can still do the test.
2. The " " and " " symbols are blinking when the battery is too
low. Meter is unable to perform a normal test. Please change the
battery immediately.
Strip Error
1. When the test strip is inserted incorrectly, the meter will beep 4 times
while the " " symbol flashes. Do not apply a sample on the test
strip. Please re-insert the unused test strip correctly ( refer to "Handling
the
GS260 Blood Glucose Test Strip" on P.23 for more
information).
2. If, after performing the required steps, the " " and flashing " "
symbols appear on the screen, it means the GS260 Test strip
has been inserted incorrectly more than twice. Please, re-insert the
unused test strip again after reviewing the steps on how to insert a test
strip correctly on P.23 or call Customer Service for support. This error
message can also indicate that you may have used the wrong test strips.
Please check the test strip vial to ensure you are using the
GS260 Test strips.
"
TM
Rightest
TM
Rightest
TM
Rightest
1a
1
1b
CAUTION
A blood sample should ONLY be applied to the test strip after the test strip has been
inserted correctly and the Meter's screen is showing the image of the test strip and a blood
drop flashing symbol. If the blood drop flashing symbol is NOT showing on the screen, do
not apply a sample to the test strip. Please re-insert the unused test strip correctly. The
screen MUST show the image of the test strip accompanied by the blood drop symbol
flashing (this symbol take 3 seconds to show after correctly inserting the test strip) in order
for a sample to be applied. Please consult your User Manual and/or contact Customer
Service for support on how to correctly insert a
GS260 Test strip.
TM
Rightest