41
40
Performing a Test in Order
Comprehending Test Results and Messages
If your blood glucose result is unusually high or low, or if you question your testing results, repeat
the test with a new test strip. You can also run a QUALITY CONTROL TEST with your
Check Key and Control Solutions to check your meter and strip. ( Refer to page 46. )
If the test result still remains unusually high or low, contact your healthcare professional
immediately.
If you are experiencing symptoms that are not consistent with your blood glucose test results and
you have made sure to follow all instructions of this manual, contact your healthcare professional
immediately.
3. The testing result with time and date is automatically stored in your
meter's memory. You may also record the glucose value in your Log
Book.
4. Rotate to remove the test strip. Please follow the local regulation and
discard the used strip properly.
5. Pull off the depth adjustable cap. Without touching the used
disposable lancet, stick the lancet tip into the protective cover.
6. Hold the release button in one hand and pull on the plunger in the
other hand will safely eject the used disposable lancet.
7. Discard the used disposable lancet into an appropriate puncture-
proof or biohazard container.
8. Replace the depth adjustable cap after finishing the test.
PRECAUTION
- The meter will power off automatically after 3 minutes no use. You can also turn off the meter
by pressing the main button for 2 seconds.
5
1
2
6
7
8
