PRECAUTION
When the display on meter screen shows time, memory or average, keep pressing " "
button
(right button)
for 5 seconds to enter setting mode.
Entering Setting Mode
You can enter Setting Mode by below two ways.
1. Reload batteries : After removing the battery, please press " " button
(left button)
for several
times until no signal on screen, then follow the steps of page 20~21 to load batteries.
2. With batteries : Press " " button
(right button)
for 5 seconds till hearing a sound of " beep ". The
display screen will show setting data.
When you keep pressing " " button
(right button)
for 2 seconds, the display on screen will turn
off. Please don't care it. Keep pressing the " " button
(right button)
till entering Setting Mode.
Setting Up Your Meter
23
22
Setting Up Your Meter
Setting the Time, Date and Unit
2. Month setting
With the month blinking, press the " " button
(left button)
until the current
month appears. Then press the " " button
(right button)
to confirm it and
move to day setting.
NOTE
- Fast Settings: When you do the settings, you can press the " "
buttons
(left button)
and hold it for 2 seconds to adjust faster.
- If you miss the numbers of year, date, month, hour or minute when you
do the setting adjustment, please keep pressing the " "
(left button)
till the end of number ( The end of year number is 99. The end of date
number is 31. The end of month number is 12. The end of hour number
is 12 or 24. The end of minute number is 60.) And rerun back to the
correct number you want.
1. Year setting
With the year format blinking, press the " " button
(left button)
to adjust
it. Then press the " " button
(right button)
to confirm the year adjustment
and move to month setting.
