39
38
View Window Appearance
- To ensure accurate test results, make sure the code number on your meter matches the
code number highlighted on the vial of test strips you are using.
- Only place the blood drop to the sample entry of the strip.
- Keep your Smart Code Key dry and clean. Please clean it up right away if your Smart Code
Key gets blood stain or moisture. ( Refer to page 55 for cleaning )
- Pose the finger and the strip to the way you feel most comfortable.
- Please follow the local regulation and discard the used strip and lancet properly.
Appearance of result
1. When blood is applied to the strip, you see the countdown mode appearing on
your screen. This means the meter is measuring your glucose value.
2. Your blood glucose result appears after the measurement is completed. The
result is displayed in mmol/L or mg/dL. At the same time, the result will be
memorized with time and date.
PRECAUTION
- Check the expiration date printed on the package every time you use the strip. Do not use
expired test strips.
- Use each test strip immediately after taking it out from the vial.
- Do not reuse test strips.
- Assemble the Smart Code Key into your meter is necessary before starting your test.
- Be sure to change the Smart Code Key with each new box of Test Strips.
- Do the test at least 30 minutes after while entering another site with different ambient
temperature.
Performing a Test in Order
Performing a Test in Order
Insufficient blood sample
Enough blood sample
Make sure your blood sample covers
the whole area of the View Window
to get an accurate test result.
Insufficient blood sample might
cause inaccurate test result. Repeat
the test with a new test strip.
