Bionet Oxy9Wave Vet, Operation Manual

Page: 22 / 48

Oxy9Wave Vet
Operation manual
Ver. 1.52 4.Operation 22
4-1. Introduction
The parameters of the Oxy9Wave Vet monitor are preset to factory default.
The factory/default setting for the parameters may be changed to institutional default setting by
following the procedures in the Oxy9Wave Vet service manual.
The table below lists the parameters, ranges available, and factory default.
The parameters may be set on an individual basis by the clinician; these settings will remain in
effect until Oxy9Wave Vet is turned off.
Parameter Range Factory Default
ANIMAL TYPE CAT / DOG CAT
%SpO ₂ Lower Alarm Limit 40 ~ 99% 90%
BPM Upper Alarm Limit 31 ~ 250 bpm 150 bpm
BPM Lower Alarm Limit 30 ~ 249 bpm 50 bpm
%SpO ₂ LEVEL H / M / L H
BPM LEVEL H / M / L H
Alarm Volume 1~5 4
Alarm ON / OFF ON
Alarm Silence Duration 90, 120, OFF 120
Brightness 1~5 4
Pulse beep 1~4 OFF 3
Display View GRAPHICS / NUMBERS GRAPHICS
SAVE AUTO / EVENT / OFF OFF
INTERVAL 10 / 30 / 60 SEC 10 SEC
DELETE NO / YES NO
KEY SOUND ON / OFF OFF
PULSE LED ON / OFF OFF
DEFAULT NO / YES NO