manualshive.com logo in svg

Bioness VEC-1000, Clinicians Manual

Share
Download
Bioness VEC-1000 Clinicians Manual Download Page 70

61

Chapter 9 - Vector Elite Remote Control

Status Screen

The Session Status screen displays information for the current training session, including the unloading 
value, training time of the session, distance traveled, and number of prevented falls. The system unit 
settings and software version can also be accessed from this screen by pressing the Settings button. 
To look up the software version press the Reference button.

Take Control Screen

The Take Control screen transfers control of the Vector Elite system from the PC to the remote control. 

Press the Take Control button to transfer control from the PC to the remote control. See Figure 9-3. 
Once control has been transferred, the Take Control button on the remote control will be disabled and 
the Training Controls buttons will be enabled. 

The Connect Treadmill button is also located on the Take Control screen. Press the Connect Treadmill 
button to connect with a compatible treadmill and control it from the Remote Control

Figure 9-3: Take Control Screen

Treadmill Controls Screen 

The Treadmill Controls screen is used to remotely start, stop, and modify settings of the treadmill from 
the Remote Control. This screen is displayed only after connecting a compatible treadmill via the Take 
Control Screen. See Figure 9-4.

Take Control

Connect Treadmill

Summary of Contents for VEC-1000
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands