TG
RADIENT
Manual __________________________________________________________ 12
Directory:
3
program no.
0
Name:
TEST 1
lid temp: 105 °C
preheating: on
edit
A on/off
B files
C pgm OK
D enter
Note:
The default setting, which is recommended for most applications, is preheating: on.
After all pre-settings have been made, press [D enter] to open the programming spreadsheet.
4.7
Enter temperature and time settings
The programming spreadsheet:
Temp[°C]
time
ß
# gradient[°C]
opt
à
1
2:
3:
4:
A ?
B insert/delete
C pgm OK
D enter
Note:
In this spreadsheet you can enter all parameters for your cycling protocol. Furthermore,
you can set special parameters like touch down, ramping rates or time increments. For further
details on these special parameters, see section 5.1.
Note:
You can navigate in the spreadsheet without limitations with the four cursor keys
ïðñò
.
Note:
Each setting is confirmed with [D enter]. The cursor moves automatically to the next field.
Alternatively, you can confirm a value by moving forward with the cursor keys.
Note:
At any time you can call up the help function with [A ?]
Note:
In an existing protocol program steps can be deleted and inserted. For further information
on deleting and inserting program steps see section 5.1.
Now enter temperature for the first step in the protocol:
Temp[°C]
time
ß
# gradient[°C]
opt
à
1
95,0
2:
3:
4:
A ?
B insert/delete
C pgm OK
D enter
Confirm temperature with [D enter] or just move on with the cursor key. If you move to the next
row, the setting will be stored in the temporary memory.