10
STEP 2:
PREPARING THE SYSTEM TO BEGIN TREATMENT
The link cable arrives disconnected from the control unit.
Connect one end of the link
cable to the control unit cable
as illustrated.
After confirming that the link cable is properly
connected to the control unit, connect the other
end of the link cable to the FLX
®
Flexible Treatment Coil.
This connection allows for simple quick disconnect and
reconnect by the patient.
Next, position the FLX
®
Flexible Treatment Coil over the fracture
site. The entire fracture site should be centered within the coil
treatment window.
A
B
C
