22
CASTED APPLICATIONS:
1. Apply 1-2 rolls of casting material (synthetic or plaster) in the usual manner and
allow it to set. Center the coil over the fracture site, confirming correct placement
with an x-ray if necessary.
2. Incorporate the coil into the cast with an additional wrap of casting material.
3. Position the connector mounting assembly near the coil and incorporate it into
the cast with additional cast material.
SPECIAL NOTE:
If patient compliance with the system is not a concern, the treatment coil
may be placed on top of a cast or brace. Be sure to mark the coil placement with an indelible
marker for easy refitting by the patient.
