User Manual Smart Storage Agitator 30
Version
: 1.0
Validation date of the manual: 01/08/2021
17 of 29
4
Safety instructions
This chapter details the safety precautions to be applied when using the SST-A30.
Please read these instructions carefully.
4.1
General safety
•
Have all installation work and adjustments performed by qualified personnel only.
Operations performed by persons lacking competence in this area may adversely
affect the performance of the device and cause damage to property and body.
•
Only qualified service technicians will be authorized to perform maintenance
operations and repairs.
•
Make sure that the power cord is not pinched or kinked when installing or moving
the machine.
•
Do not disassemble or modify system elements once the installation has been
validated.
•
Do not put an object other than insert bags on a drawer.
•
Do not lean on a drawer.
•
The SST-A30 cannot be stored or used outside the temperature and air pressure
ranges specified in this manual (chapter 2.2)
•
Do not cover the drawers of the SST-A30 and / or obstruct the air vents.
•
The SST-A30 must be fixed in the Platelet agitator so that it cannot be
disassembled without the use of a tool (as part of a maintenance operation).
•
Never allow water or other liquids to enter the equipment to avoid the risk of
short circuiting or oxidation of metal parts.
•
The use of the SST-A30 is limited to trained and qualified personnel to work in a
medical environment.
•
Excluding maintenance activities (see installation and maintenance manual), do
not disconnect the power supply (100 / 240Vac - 15Vdc), do not disconnect the
cable between the calculator and the RFID module attached to the back of the
unit, do not disconnect the Ethernet network cable.
•
Do not disconnect satellite from the RFID card if the SST-A30 system is powered.
•
The SST-A30 must only be used with the original accessories or original spare parts
as these are the only accessories / spare parts whose reliability, safety and
compatibility with our medical device have been checked.
•
In all circumstances, follow the instructions of the safety signs affixed to the SST-
A30.
•
The safety instructions on or adjacent to the SST-A30 must always be legible and
complete throughout the life of the product. If, during the life of the SST-A30, the
safety signs are discolored or damaged, notify the Biolog-id support service
(
