User Manual Smart Storage Agitator 30
Version
: 1.0
Validation date of the manual: 01/08/2021
15 of 29
3.3
Status of the satellite LED
The satellites are placed between 2 drawers. On their front, they have a LED having 3 different
colors whose meanings are explained in this chapter.
Satellites LED Light Status
Hardware State
GREEN LED ON steady
Normal and functional
operation mode.
GREEN LED ON blinking
Maintenance and functional
operation mode (cleaning or
technical intervention).
ORANGE LED ON steady
An error occurs while
reading/writing an RFID chip
with no hardware failure
identified.
Refer to chapter
More details above this table.
ORANGE LED ON blinking
A drawer is left open more than
4 minutes.
Close the drawer.
RED LED ON steady
Note: There is potentially no
traceability at the location
where the indicator is red.
Hardware failure.
Refer to chapter
GREEN/ORANGE/RED cycle
Note: It is an indicator at
start-up to check that when
powering up the satellites
are working.
5 seconds on power up.
Wait for the complete start of
the hardware.
LED OFF
Hardware OFF or failure.
Refer to chapter
In the event of a writing failure on an RFID chip, an error message is returned to the third-
party system that initiated the request and the LED of one or two satellites lights up in orange.
If the RFID chip that could not be written is in:
➢
drawer # 1
-
The LED of satellite # 1 is lit in orange
