Biolase Waterlase iPlus, User Manual

Page: 36 / 82

8
Operating Instructions
• Access the Custom operational menu, Advanced Menu, not associated
with any clinical procedure;
• Purge and prime the Fiber Cable;
• Adjust sound;
• Restore factory pre-sets;
• Select language;
• Adjust the Aiming beam and Illumination;
• Access the Service Screen.
When switching to the Settings/Memory Menu from the Procedure screen or
the Advanced screen, the latest settings and name of the procedure step are
displayed at the top of the display. To save the current settings into one of the
“Favorites,” press and hold one of the nine buttons for 2 seconds; the name of
the procedure and step will appear inside the button (in the Advanced screen,
the name for the button will be given as “Custom 1”, “Custom 2”, etc.).
Fig 8.9
36
Waterlase iPlus User Manual
"locked lock" symbol, confirming that the settings have been changed back to
facotry pre-set values.
Factory recommended settings and modified settings can be saved as one of
the "Favorites," if desired.
The entire original factory pre-sets can be restored, as well, when the Settings
Menu RESTORE ALL icon is selected.
No parameters can be changed while the system is in Firing mode.
Default settings for illumination (both Aiming Beam and Light) are in the
middle of the adjustment range. The same is true for the Sound Tone.
SETTINGS / MEMORY MENU
The Settings / Memory Menu stores up to 9 "Favorites" (Fig 8.9). It can
correspond to a particular step of the procedure described in the Main
Application Menu, or it can be completely independent, if selected by the user
and stored from the Advanced Menu.
This Menu also provides access to supplementary functions that allow the
user to perform the following activities: