Biolase Epic, User Manual

Page: 29 / 56

29
Epic Hygiene User Manual
CAUTION: Verify that the Fiber Optic Cable tubing assembly is not twisted once the
Handpiece is returned to the holder. The fiber may break if it is twisted.
7.1 5 PROCEDURES BUTTON
The Epic Hygiene has the ability to store up to 12 pre-set procedures . The laser has 6 pre-programmed
procedural presets installed and 6 empty slots for custom use . Pre-programmed settings can be
customized to your preference.
To customize the parameters (e.g., power, pulse duration, interval, etc.) for a particular clinical
procedure:
1. From
the PROCEDURES
(Home)
screen scroll to and select the pre-set
for
overwrite
(Figure 7.30).
2. Make the desired changes, then p ress and hold the banner on the selected procedure for two
seconds (Figure 7.31). The parameters for that one procedure will be changed , and saved (the
laser console will beep when the adjusted settings are saved).
7.1 6 TURN
ING
THE LASER CONSOLE OFF
• Wind the Fiber Optic Cable onto the fiber storage channel counterclockwise around the base of
the console
• Place the Handpiece onto the Handpiece Holder
• Press the CONTROL button on the front of the console for more than 2 seconds to turn the console
display off
• Press the power switch at the rear of the laser console to the OFF (O) position if the laser system
will not be used for an extended period of time
7
Installation and Set-Up
Figure 7.30
Figure 7.31