BIOLABO Diagnostics KENZA 240 TX, User Manual, Page: 53 / 56

8.1.2 Patient results
Many data are collected during every analysis. All the data can be accessed, and can be displayed
graphically to facilitate the understanding.
To access the data, select a patient result and click on
The following screen is displayed.
To see details, click on .
This menu allows checking the reaction curve and reaction data.
The default graph displayed is the reaction
select other wavelength in case of need, or check the data by clicking on
N N o o t t e e
: Graphics and data can be printed
8.1.3 Calibration and control results
Refer to chapter 5.3 View / modify calibrations
Erreur ! Source du renvoi introuvable.
Patient results - Details
Many data are collected during every analysis. All the data can be accessed, and can be displayed
to facilitate the understanding.
To access the data, select a patient result and click on .
Patient information
Optical densities plot for kinetics and Fixed time.
Results
N
N
o
o
t
t
e
e
: if an analysis has been r
stored as “previous”. The last result is “Actual”.
the reaction curve and reaction data.
The default graph displayed is the reaction curved at the wavelength used for the calibration. You can also
gth in case of need, or check the data by clicking on
: Graphics and data can be printed. Click on .
Calibration and control results
/ modify calibrations page - 33 -, and Erreur ! Source du renvoi introuvable.
! Source du renvoi introuvable. page Erreur ! Signet non défini..
- 53 -
Many data are collected during every analysis. All the data can be accessed, and can be displayed
Optical densities plot for kinetics and Fixed time.
an analysis has been rerun, all results are
stored as “previous”. The last result is “Actual”.
curved at the wavelength used for the calibration. You can also
! Source du renvoi introuvable.