Second Edition, Version 2.03
April 2017
PlasmaDive
™ Mini Manual, © Biognosys AG, Switzerland
Page 8 of 22
SpectroDive™ Software and PlasmaDive™ Mini Panel Plug-in
An integral part of the PlasmaDive
™ Assay Panel is the SpectroDive™ software that
enables easy MS method setup and automated signal processing of your LC-
MRM/PRM measurements.
SpectroDive™ supports all Biognosys’ Assay Panels. For
each panel corresponding software plug-ins are required.
SpectroDive™ is free for academic researchers and can be obtained at
www.biognosys.com/shop/spectrodive
. The downloading instructions and your
personal
License Key
will be sent to your e-mail account within one working day after
the registration. Enterprise licenses are available for industry customers at
www.biognosys.com/shop/spectrodive
. PlasmaDive
™ Mini Panel MRM and PRM
plug-ins will be provided to you by the Biognosys team upon request to
SpectroDive™ can be installed and run on a notebook or desktop computer. The
minimal system requirements are:
Windows 7 or higher, 4GB RAM, 50GB free hard
disc space, software .NET 4.5.
SpectroDive™ Installation
Close all running programs
Open
the SpectroDive™ installer (administrator rights are required) and follow the
wizard instructions
Carefully read through the license agreement
Choose the location for installation
Check settings and proceed with installation
A confirmation message will appear after successful installation
SpectroDive™ Activation
When running SpectroDive™ for the first time you will be prompted to activate the
software. For activation use your personal License Key from the e-mail with the
downloading instructions.
An internet connection is required for the on-line
SpectroDive™ activation. If your
computer is not connected to the internet or the activation is blocked by your firewall,
please follow the
SpectroDive™ instructions for the off-line activation.
PlasmaDive
™ Mini Panel Plug-in Import (MRM or PRM)
In SpectroDive™ select the ‘Prepare’ perspective by clicking on the corresponding
icon on the top.
Import the
.kit
file for PlasmaDive
™ Mini by clicking on ‘Import New Panel’ in the low
part of
‘1) Choose Panel’ section on the left.
The panel “PlasmaDive™ 100.2.1 Mini” or “PlasmaDive™ 100.2.1 Mini PRM” is now
available
in the ‘Panel’ folder.
