GeneExplorer Thermal Cyeler Operation Manual
Important Notes
—
iii
—
3
Instrument label
Warning sign
Warning!
The instrument is pasted with a label of “HOT SURFACE!”. Any part of body is
strictly prohibited from touching the metal part (module and hot lid) around the label
during instrument operation or within a certain period after the program ends.
Warning!
The instrument is pasted with label of BIO-RISK, which indicates that the instrument
presents potential infectivity due to sample or reagent.
4
Instrument maintenance
Periodically use clean soft cloth dipped with ethanol to clean the block wells on module to ensure
sufficient contact between test tubes and taper holes and to ensure favorable heat conduction. If there is any
dirt on the instrument surface, use soft cloth dipped with cleansing cream to clean.
Warning!
The power must be cut off when cleaning the instrument surface.
Corrosive detergent is strictly prohibited from being used to clean the instrument
surface.
Attention:
In any of the following cases, immediately unplug the power supply from the
socket, and contact the supplier or ask qualified maintenance personnel for
treatment:
Liquid enter into the instrument;
The instrument is exposed to rain or wet by water;
The instrument fails to work normally, especially there is any abnormal sound
or flavor;
The instrument drops down or the shell is damaged;
The instrument function has evident change;
For any doubt concerning the compatibility between detergent and equipment
part or materials contained in the equipment, please consult the manufacturer
or its agent.
