Gene Explorer Thermal Cyeler Operation Manual
Chapter Four Operation Instructions
－
8
－
Chapter Four Operation Instructions
In this chapter, the methods of editing, viewing, revising and deleting PCR
amplification files are introduced in detail, as well as the method of running PCR
amplification files and setting of instrument system parameters.
Warning!
After the instrument is turned on, if there is any abnormal sound or display, or
fault alarm and prompt presents during instrument self-test, please
immediately turn off the power and contact the supplier.
Attention:
If the sample volume of your experiment is less than the number of cone
holes of the module, please evenly distribute the test tubes to ensure stable
press of the hot lid on the test tube tops, which will also contribute to uniform
module loading and ensure uniformity of temperature change in each test
tube.
1 Turn on the instrument
Turn on the power switch and then the instrument will carry out self-test, please wait patiently. If the
self-test has discovered no problems, the main interface will show on the screen.
Module Type is displayed at bottom left of the main interface. At the middle of the main
interface, it displays four functions of software which are New Experiment, Open
Experiment, Recently Opened and Settings.
