Biobase LC-4KC, User Manual, Page: 66 / 71

9
①
Press the “ DOWN” button to adjust the deceleration of the rotating speed, or touch the
screen and click the icon to do the same operation. There are 10 deceleration levels: 0 is the slowest
while 9 is the fastest.
As it is shown below:
②
Press the “ UP” button to adjust the acceleration of the rotating speed, or touch the
screen and click the icon to do the same operation. There are 10 acceleration levels: 0 is the slowest
while 9 is the fastest.
As it is shown below:
4
）
When finishing every step mentioned above, press the “ ENTER” button for about 2
seconds to preserve the adjusted value, and then withdraw from the adjusted state.
7
、
After checking out the settings mentioned above, press the “ START” button to start the
operation of the machine. During the operation, the current centrifugal force can be displayed on the
window by pressing the “ RCF” button, or touching the screen and clicking the RCF
icon. Repress the button, and the rotating speed value can be displayed again.
8
、
When counting down to 0, the centrifuge machine stops working automatically. During the
operation, pressing the “ STOP & OPEN” button can also stops the operation of the machine.
When the rotating speed reaches 0, the buzzer would make a buzzing sound, and the cue words
would be displayed on the window. The faceplate can be removed.
9
、
When press the “ IMPULS” button and hold for a few seconds, the rotors would start
rotation slowly; when the rotating speed reaches its fastest speed, the rotors would not
accelerate the speed any more. When relax the “ IMPULS” button, the rotors begin the
deceleration until they stop rotating. During the deceleration process, the “ IMPULS”
button cannot be pressed any longer; when the rotors stop the rotation completely, the centrifugal