Biobase LC-4KC, User Manual, Page: 41 / 71

1
Preface
Thank you for purchasing Table-type Low Speed Centrifuge.
When you operate the instrument, be sure to pay attention to the following points to prevent a safety
accident.
1. The main power plug should be removed when the machine is not used for a long time or when
repairing. The main power plug is not removed and the instrument is still powered.
(This unit uses a single-phase AC power supply of 220V.)
2. It is strictly forbidden to have large rotor weighing error and unbalanced operation.
3. Do not exceed the maximum speed set by the rotor, otherwise it is prone to a serious accident.
4. If the rotor body or the hanging cup is cracked, it is strictly forbidden to use, otherwise it will
burst.
Statement
Jinan Biobase Biotech Co., Ltd(hereinafter referred to as "Biobase") has the final interpretation of
this manual.
The Company shall be responsible for the safety, reliability and performance of the product only if
all of the following requirements happened:
1. Assembly operations, expansion, re-adjustment, improvement and repair by the Company
recognized professionals.
2. All repairs involving replacement parts and supporting the use of accessories, supplies are
original of the Company (original) or approved by the Company.
3. The related electrical equipment is according to national standards and the use of the manual
requirements.
4. Product operation is carried out according to the instruction manual.