Biobase LC-4KC, User Manual, Page: 29 / 71

6
2
．：
The display area of the parameter numbers.
3
．：
The operation icon.
4
．：
The setting of rotor modes.
5
．：
The setting of rotating speed.
6
．：
The “SET” button.
7
．：
The “RCF” button.
8
．：
The “START” button.
9
．：
The “UP” button.
10
．：
The “DOWN” button.
11
．：
The temperature setting and display area.
（
This is the cavity temperature, and non-refrigerated centrifuge has no such setting function.
）
12
．：
The display area of rotating speed and centrifugal force.
13
．：
The shift button of rotating speed and centrifugal force.
14
．：
The area of acceleration and deceleration
15
．：
The “INPULS” button
16
．：
The “Enter” button
17
：
The “STOP & OPEN”button
1
）
The display panel of the startup
Press the “ UP” or “ DOWN” button to choose the proper parameter set.
Attention: There are 20 sets of parameter set ranging from 00 to 19.
As it is shown below: