MP 030 EL NM GB
Copyright BIO-UV - 29/01/2009
Marque, Modèles et Brevets déposés - Produits exclusifs
Page 19
RECOMMENDED INSPECTIONS AND PREVENTIVE MAINTENANCE
0
Changing UV lamps
At the end of their life span:
-
either display on the Millénium III monitor: UV
intensity <50%
-
or combined chlorine rate in the basin
OPERATIONS
ON EACH UV LAMP
CHANGEOVER
AT LEAST ONCE
PER YEAR
Checking the general state of the UV
reactor
1
Replacement of quad ring seals
Compulsory
Compulsory
2
Checking the presence of quartz sheath
Teflon shims
Compulsory
3
Cleaning or replacing the quartz sheath
Compulsory
4
Replacing the cleaning wipers
Recommended
5
Cleaning the UV sensor
Compulsory
Compulsory
6
Check the operation of the flowmeter
Compulsory
7
Check the operation of ventilators:
- Cleaning grills
- Filter replacement (if applicable)
Recommended
Compulsory
8
UV sensor calibration
Only new lamps, quartz sheath clean or new, UV
sensor cleaned
9
Pneumatic silencer replacement
Only in the event of corrosion
10
Check the earthing of the reactor
11
Check the operation of the thermostat in the
electrical cabinet
Recommended
12
Check the operation of the circuit breaker
Recommended
13
Check tightening:
- Of terminal blocks in the cabinet
- Of connectors
- Of UV lamp connections
Recommended