Table 4. (continued)
Procedure for Creating and Running a Method
Step
Procedure
Description
8.
Program the next step or
save the program.
9.
Enter the method number.
10.
Start the run or exit to the
main menu.
11.
To stop the run at any time,
press either of the following
keys:
14
POWER
PAC
Program Mode Operation
Select either of the following:
a.
If you are defining another step, select
ADD STEP
. Repeat
procedures 3 through 6 above.
b.
If your method is complete, select
SAVE PROGRAM
.
Using the keypad, select a number from 1 to 9.
Note:
The available method numbers are listed. Choosing a
number which is not listed overwrites an existing method.
To start the run using the method’s new parameter values,
press
.
Figure 5 shows the contents of the Run screen.
Figure 6 shows the contents of the screen after completion of
a run.
To quit and return to the main menu, press the
Exit
key.
The following keys can be used to stop the run before it is
completed:
Stops the run and displays the end-of-run parameters.
Interrupts operation of the power supply until the
key is pressed. During the pause, the LCD display
shows the status of the run at the time the key was
pressed. Run parameters cannot be changed during
a pause. If you do not wish to continue the run, press
the
key.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
