9
T
UBING
R
EMOVAL
•
If the system has been in use, shut off supply valve and drain the system before removing any tubing.
•
Push in collar, squarely against the face of the fitting. Holding collar in position, pull tubing from the fitting.
Figure 6 - Tubing Removal
T
ECHNICAL
A
SSISTANCE
Atlantic Ultraviolet Corporation maintains a qualified team of application specialists that can provide any technical
assistance, which maybe required during the use of this system. For any questions, concerns, or technical assistance,
regarding this system or any of our other products, contact our application specialists. Contact options can be found in
the “
User Assistance
” section.
Figure 5 - Tubing Installation
T
UBING
I
NSTALLATION
•
Measure and cut the tubing to desired length. Leave enough slack in the tubing so the system can be easily
removed, if necessary. Cut the tubing square; remove all burrs and sharp edges.
•
Insert tubing into fitting; push until it reaches the tube stop. Avoid kinking or stretching tubing. Check that tubing
is secure; gently pull on tubing, tubing should not pull free from fitting.
