I
NSTALLING THE
NetRACER
5
Installing the
NetRACER
Select a flat, stable location for your NetRACER and con-
nect the included cables to the ports located on the back
plane as shown in the diagram below.
Incorrect cabling of the LAN and ISDN interfaces could
damage your router. Don´t interchange the LAN and
ISDN interfaces. Only connect the LAN interface of your
router with the LAN interface of your PC/hub. Only con-
nect the ISDN interface of your router with your ISDN
outlet.
Using an incorrect power supply may damage your
router. Only use the included 16VAC power supply when
supplying power to your NetRACER. BinTec Communi-
cations AG cannot assume responsibility for any damage
resulting from the use of other power supplies.
Please note that the NetRACER power supply has an out-
put of 16V~/1A while the BinGO! power supply has an
!
!
