Fig. 19:
WAN connectors
Note
During booting and in BIOS mode, the WAN connectors do not work.
3.7.3 Connecting a 3G USB device (USB connector)
The RXM7000 router has a USB HOST 2.0 Type A connector interface. It allows 3G USB modems to be connected.
The interface can be activated by purchasing the corresponding software license.
Fig. 20:
3G USB Connector
3.7.4 Connecting for Configuration
The RXM7000 has a RJ45 female connector on the front panel (labeled Aux) that provides access to the device's
local console.
For further information, please see
Connecting to the device
on page 24.
Fig. 21:
Aux. Connector
3.8 Optional Storage
The applications running in the second core of the device processor can increase the features of the RXM7000
router.
To access said features, the device must have an internally-installed hard disk or an SD flash memory expansion.
Note
Please see the bintec website http://www.bintec-elmeg.com for a list of supported hard disks.
3.8.1 Procedure to install a hard disk
To correctly insert a hard disk, please carry out the following steps:
(1)
Switch off the device and remove the data cables as described under section
Disconnecting
on page 12.
(2)
Remove the device from the workplace and place it in a stable and safe location, where it can be easily ac-
cessed and handled.
(3)
Unscrew the screws on the front panel to extract the tray for hard disk access.
3 Components and Power Supply
bintec elmeg
16
RXM7000
Summary of Contents for RXM7000
Page 5: ...I Related Documents bintec Dm748 I Software Updating bintec elmeg Related Documents RXM7000 1...
Page 7: ...Fax 49 911 688 0725 Email support bintec elmeg com bintec elmeg 1 About This Guide RXM7000 3...
Page 23: ...Fig 27 Inserting SD card bintec elmeg 3 Components and Power Supply RXM7000 19...
