(5)
Finally, put the tray that holds the card back into the device.
Fig. 7:
Inserting the expansion card
(6)
Screw the tray to the device.
Fig. 8:
Screw the tray to the front panel
(7)
Connect the equipment as indicated in section 3.5.1.1 "Connecting". Connect a terminal to the console and veri-
fy that the expansion card has been detected.
3.3 Installation in a rack
The RXM7000 device can be installed in a 19” rack. The necessary strips and screws are not provided by default
and have to be acquired separately.
(1)
First, the maroon side tabs must be removed to free the screws holes:
bintec elmeg
3 Components and Power Supply
RXM7000
9
Summary of Contents for RXM7000
Page 5: ...I Related Documents bintec Dm748 I Software Updating bintec elmeg Related Documents RXM7000 1...
Page 7: ...Fax 49 911 688 0725 Email support bintec elmeg com bintec elmeg 1 About This Guide RXM7000 3...
Page 23: ...Fig 27 Inserting SD card bintec elmeg 3 Components and Power Supply RXM7000 19...
