4.7 National restrictions
In accordance with Article 10 of the Radio Equipment Directive 2014/53/EU, we inform you that national restrictions
and requirements may apply when it comes to authorization. Not all countries have implemented the harmonized use
of 5 GHz for the implementation of Wireless Access Systems/Radio Local Area Networks (WAS//RLANs) yet.
Since countries set their own regulations, bintec elmeg GmbH recommends that local authorities are consulted as
regulations may change from time to time.
This product is supplied without antennas. The choice of antennas is left to the discretion of the operator, who shall
be responsible for ensuring that they comply with local regulations.
Please by aware of the regulations in the country where the equipment will be installed and ensure the characterist-
ics of the antennas are in compliance with those regulations prior to installation.
4.8 FCC Statements
4.8.1 Interference
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resid-
ential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equipment off and on, the user is en-
couraged to try to correct the interference by doing one of the following:
• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to an outlet on a different circuit, i.e., not the one to which the receiver is connected.
• Consulting the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
Authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including in-
terference that may cause undesired operation.
The specific FCC is based on Grant Conditions of the Certified Wireless Modules (Single Modular Approval). The in-
tegrated Radio modules meet FCC with own ID numbers:
• Contains FCC ID: N7NMC7455
• Contains FCC ID: N7NMC7355
• Contains FCC ID: TK4WLE600VX
• Contains FCC ID: PKRNVWE362
• Contains FCC ID: XMR201808EC25AF
4.8.2 Radiation Exposure
This equipment is compliant with FCC exposure limits for uncontrolled environments.
For the purposes of RF exposure evaluation, this device is defined as a transmitting device designed to be generally
used in such a way that a separation distance of, at least, 20 centimeters is normally maintained between the trans-
mitter's radiating structures (the antenna) and the body of the user or nearby persons.
bintec elmeg GmbH
4 Compliance
bintec H2 Aut
25
