• For sheet metal installation, use #8 self-drilling screws.
• For tapped holes, use M4 machine screws.
Warning
If the screws are not properly anchored, the strain of the cables connected to the router could pull the
router out.
Note
Mounting screws are not provided with the router and must be purchased separately.
Warning
This device is designed to operate in a wide range of temperatures (up to 70ºC or 158ºF). At high tem-
peratures, the metal surface can get dangerously hot and cause injuries.
If the ambient temperature exceeds 50ºC (122ºF), the unit must be placed in a Restricted Access Loca-
tion (RAL) with access granted to trained service personnel only. Access to the RAL shall only be pos-
sible through the use of a special tool, lock, key or other means of security. The RAL should be strictly
monitored by the relevant authorities.
Any spaces or cavities inside the vehicle, which are only accessible to trained service personnel via a
tool, lock, key or other security means, are considered RALs. The vehicle trunk is not considered an
RAL.
If you plan on installing the device in a non-RAL accessible to untrained service personnel, you must
place it in a separate secure compartment such as a Security Lock Box.
Fig. 7:
Security Lock Box
3.2.2 Outline drawing
Here is a simple outline drawing of the unit with data pertinent to proper installation.
3 Components and power supply
bintec elmeg GmbH
8
bintec H2 Aut
