8.12 Module Power supply unit (M PSU)
The module Power supply unit is an integral part of the elmeg hybird 300.
In the elmeg hybird 600 the Power supply unit is a slide-in module. After disconnection of the power supply and
removal of the two knurled screws from the elmeg hybird 600, this module may be extracted and replaced.
If one or more modules 4 - 6 are present in the elmeg hybird 600, a second power supply must be inserted, as the-
se modules are only powered from the second power supply.
Achtung
The Power supply unit module may only be extracted or inserted after the power has been cut.
8.12.1 Module mains unit 1/2
Mains unit 1 and mains unit 2 are identical in construction. They may be exchanged. The left mains unit inserted in
the system must always be present as it supplies the base module, along with modules 1 - 3 and 7 - 11; the right in-
serted mains unit, only supplies modules 4 - 6.
Achtung
Before extracting and inserting mains units, the system power cord must be pulled.
Hinweis
The mains units are secured to the system with knurled screws. These knurled screws are components
of the system rather than of the mains units. Hence, as a rule, mains unit are supplied without knurled
screws.
bintec elmeg GmbH
8 Mounting modules
elmeg hybird 300 / 600
43
