- 13 -
Figure 4: RM10K Remote Control
Battery Installation
Slide the battery access cover on the back of the RM10K
enclosure in the direction of the arrow to open. Remove the old
battery if present. Install a new 9V battery and slide the cover
back into place.
Operational Distance Settings
Typically, the RM10K needs to be within 6 inches (150 mm) of the
TX10K for the signal to be received. This normal (low infrared
power) mode is intended to reduce the possibility of inadvertently
changing the configuration of the TX10K by accidentally pressing
a key on the RM10K. It also reduces the chance of changing the
configuration of other transmitters in a multiple-transmitter
installation.
The RM10K also has a high infrared power mode. This mode is
useful when access to the TX10K is difficult or dangerous. Line-
of-sight distances of 10 feet (3 meters) or more are feasible. The
infrared signal will reflect off bright or shiny surfaces, making non-
line-of-sight operation possible in some situations.
To enable the high infrared power mode, first press and release
the
TRANSMITTER ON
key and then press the desired function
Summary of Contents for TorqueTrak 10K-LP
Page 1: ...TorqueTrak 10K LP Torque Telemetry System User s Guide 869501 9_F ...
Page 2: ......
Page 45: ... 43 ...
