WR-30 Point-to-Point Wireless Bridge Instruction Manual
4
Introduction
The BinMaster WR-30 gives you a simple, straightforward way to get an analog, discrete, or
Modbus
®
signal from where you have it to where you need it. It’s a point-to-point wireless
bridge packaged in a rugged, weather tight housing designed to meet the demands of industrial
installations.
The WR-30 is simple to order, simple to configure, and easy to trust with your application.
Guaranteed ranges assure it will work with your application, or you can send it back - no
questions asked. A wireless survey tool is available for those who may require a site survey for
longer distances, making it easy to verify the installation will work the first time.
The WR-30 takes an analog, discrete, or Modbus
®
input and wirelessly broadcasts it to a
second WR-30 unit. The secondary unit then recreates that signal at its location. The secondary
unit may also transmit its own analog, discrete, or Modbus signals back to the primary unit. Just
put the units in the field anywhere you have a signal and power.
A wide range of accessories, including mounting kits, antenna-related accessories, and
repeaters, are available. The antenna may be directly attached or remotely located. High gain
directional antennas are also offered.
Ordering Information
Standard Model
Model
Description
WR-30-TR
WR-30 Point-to-Point Wireless Bridge
Accessories
Model
Description
WR-30-RP
Wireless Repeater Kit
PDA3120-N-BM
RP-SMA F to N Male Antenna Cable 20ft
PDA3140-N-BM
RP-SMA F to N Male Antenna Cable 40ft
PDA3120-S-BM
RP-SMA M/F Antenna Cable 20ft
PDA3140-S-BM
RP-SMA M/F Antenna Cable 40ft
PDA3900-12-N-BM WR-90 MHz Antenna, 1/2" NPT
PDA3900-6Y-N-BM Yagi Antenna 6dB
PDA3900-9Y-N-BM Yagi Antenna 9dB
PDA6963-BM
Stainless Steel WR-30 Mounting Kit
