WR-30 Point-to-Point Wireless Bridge Instruction Manual
22
Password Setup
Both the primary and secondary wireless units may be protected with a four digit numeric password in
order to prevent unauthorized tampering. When a password has been set, you will be prompted to enter
that password in order to access the device menu.
To disable password protection, simply enter
0000
as the password.
Note:
See
Entering Numeric Values
on page 19 for instructions on how to enter numbers
Making Changes to a Password Protected Wireless Unit
Once a password has been set on the device, you will be required to enter that password before being
allowed to access the device menu.
Note:
Setting a password will require you to enter the password to access the device settings via the PC
software as well.
Did you forget the password?
The password may be disabled by entering a master
password. If you are authorized to make changes, enter
the master password 7300 to unlock the device.
Restore Defaults
If a mistake has been made while programming the primary or secondary device, and it is unclear where
the error occurred, the best option may be to perform a factory reset of the device and begin again.
SETUP
PASSWORD
NOW: 0000
PASSWORD (0=OFF)
SETUP MENU
BACK TO
SET: 0123
PASSWORD (0=OFF)
increments selected digit.
selec ts next digit to the right.
0000
disables the password.
